Autosampler from Spark Holland / Separations type Triathlon 900.
The Spark Holland Triathlon Autosampler is an autosampler that offers a wivariety of possibilities for HPLC. It offers three different methods of injection for an analytical run:
– Flushed Loop: The sample loop is completely (quantitatively) filled with sample, resulting in extremely good reproducibility.
– Partial Loopfill: The sample loop is partially filled with sample; this means low sample loss and programmable injection volumes.
– µL Pick-up: After aspiration of sample, the sample is transported into the loop with transport liquid (mobile phase); this means no sample loss.
The Triathlon uses a syringe to aspirate the sample from a vial into the sample loop. To prevent contamination of the syringe, the Triathlon is equipped with a buffer tubing between the syringe and the injection valve. Wash solvent is used to remove the sample from and to rinse the buffer tubing and sample needle.
Technical specifications:
220 V, 50 Hz, 150 VA.
Injection volume: 1 µl … 1 ml in 1 µl increments.
Analyze time: up to 10 hours.
External dimensions (D) x (H) x (W): 55 x 44 x 30 cm.
There is a possibility to purchase segment holders:
96 vials of 1.5 mL (STD), 12 vials per segment (8 segments in total).
32 vials of 10.0 mL, 4 vials per segment (8 segments in total).
All of our laboratory equipment gets a thorough inspection before it is placed on the website. Furthermore, the equipment is tested for extradition and only delivered if it functions properly.
